HAOAIRTECH  >  AI - Page Sitemap  >  HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo
HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo

HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo
  • HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo
  • HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo
  • HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo
  • HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo
  • HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo
  • HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo
  • HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo

HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo

HAOAIRTECH pass box controller must go through some basic production stages. They include fabric development, fabric approvals, fabric sourcing, pattern making, sampling, and mass production. The product assures an extremely high-efficient manufacturing process
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. HAOAIRTECH pass box controller must go through some basic production stages. They include fabric development, fabric approvals, fabric sourcing, pattern making, sampling, and mass production. The product assures an extremely high-efficient manufacturing process
2. Worker safety is an important reason for adopting this product. It often safeguards workers against the hazards or potential danger of the surroundings. The product stands out for its high efficiency for purification
3. This product has the required stable construction. It is less likely to wobble or have tip-over hazards in any situation. The product focuses on the good physical conditions of the workers in the workshop


                           
Product Features
Pass box four side is inner arc so that there is any dust accumulation
External size: 800*670*690mm
Internal size: 600*600*600mm
External Material: stainless steel304 (t=1.2)
Inside Material: stainless steel304 (t=1.2)
Double layer vacuum glass
Both side door is inlaid type
Locker: software computer interlocking
HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo-1


/ Products Parameter


MODEL

  HA-SPB500

HA-SPB600

HA-SPB700

External size (mm)
     (W*D*H)

700x570x590mm

800x670x690mm

900x770x790mm

Work zone (mm)
     (W*D*H)

500x500x500mm

600x600x600mm

700x700x700mm

Material  (Option)

1: Entirety Sus304.(T=1.2/1.5mm)
2: Entirety sus201. (T=1.2/1.5mm)
3:External is steel with power coated,    Internal is SUS304(T=1.2/1.5mm)
4: External is steel with power coated.    Internal is SUS201(T=1.2/1.5mm)

Control system

1: Both door is software computer control    board
2: Pass Box inside four corner is round    shape without any dust accumulation
3: Double layer vacuum glass have very    good appearance
4: Software computer interlocking door    with long time using life 

UV light

                    1 PCS

Power supply

                   220v/50HZ

packing size    (mm)

800x870x850mm

1000x870x940mm

1100x970x1050mm

Packing    material

Standard Export Poly wood Packing(Fumigant free material)



/ Specification


Illustration

1: Computer software control board 2: Door handle 3: Double layer glass door 4: UV light


HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo-2



/ Product Details


                           
part.1
Pass Box inside corner
HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo-3
                           
part.2
Pass Box outside corner
HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo-4


Introduce

The static pass box is a kind of auxiliary equipment in clean room. It is mainly used in the transmission of small pieces goods between clean area and clean area, clean area and unclean area, so as to reduce the clean room door open time and reduce the clean room pollution to the lowest level, The pass box is made of stainless steel plate, smooth and clean. The both doors are interlinked, effectively preventing cross contaminated, electronic or mechanical interlocking devices installed , and fixed with ultraviolet lamps so that eliminate the bacterial infection



/ Certificated:

HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo-5






/ Our Service


HAOAIRTECH pass box manufacturers with arc design gmp standard for cargo-6

Our Service

1:Document
A: Document for custom clear: 1 sets
B: Assemble draw: 1 pcs
C: Circuit diagram draw: 1 pcs
D: Test report : 1sets
E: Additional IQ/OQ/PQ document is available upon request.
2: Air Shower Spare Part so that you can replacement in future by yourself:
A: HEPA air filter +Pre-filter (as your request) Note: HEPA air filter should be replacement in half and one year. Pre-filter should be replacement in each 6 months, but it can refresh no more than 3 times
B: Sensor (As your request)
C: Control board (as your request)
3: The air shower guarantee time is 2 years excluding consumable parts and accessories .




Company Features
1. Guangzhou HaoAir Purification Technology Co.,Ltd. is in the leading place in terms of pass box manufacturers production.
2. Our products and service are highly recognized by customers all over the country. Products have been extensively exported to Southeast Asia, Middle East, Europe, the United States, and other countries.
3. Our company bears social responsibility. We have received the Green Label certification attesting the energetic and environmental performance of our systems.
Production of HAOAIRTECH pass box manufacturers is environmentally friendly and does not produce any water, air or noise pollution. The cleaning process ensures that it is carefully cleaned, free of dust and odor. Aluminum alloy is applied to the product to prevent distortion
The manufacture of HAOAIRTECH pass box controller includes three major stages, namely, rough machining, semi-finish machining, and finish machining. All of these stages are carried out by professional mechanical technicians.
HAOAIRTECH pass box manufacturers has been strictly evaluated. The assessments include finite element stress analysis of all components, fatigue analysis, load increase analysis, etc. The product is widely accepted for its abrasion resistance
We carry out process evaluation on HAOAIRTECHpass box controller to ensure that sewing, structure, and decoration meet international bedding standards. Adopting high-quality imported stainless steel, it has a long service life
HAOAIRTECH pass box controller has passed numbers of quality tests such as flammability and chemical emissions for being safer for the end users. The product provides a high-accuracy testing result
pass box controller has not only pass box manufacturers but also pass box manufacturers.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...