We have a team that benefits from over 15 years cleanroon equipment fieldwork and experience.
Introduction :
In the modern electronics industry , the control requirements for dust are getting higher and higher , and the level of clean room also becomes higher and higher .
In order to meet the requirements of modern electronics industry , using the original wind of the air shower , the ions emitted by the static eliminator are quickly taken out , this anti-static air shower room not only can blow out the dust from the human body , but also eliminate the static electricity in the human body and the air .
Application :
Various manufacturing industries such as electronics , optoelectronics , semiconductors , plastics , films , and printing .
Features :
1. Anti - static air shower room’s cabinet adopts power coated steel which is generally sprayed with anti - static spray metal ink with anti - static function . The coating has good adhesion, toughness , abrasion resistance , gloss and color retention , high gloss and decorative .
2. In addition to the electrostatic ion bar installed inside the anti - static air shower , and it will reach the blowing area with the wind blown through the nozzle , and then the static electricity on the surface of the person or object is neutralized , which helps to achieve the goal of eliminating static electricity .
3. The anti - static air shower room is equipped with a 360-degree adjustable stainless steel nozzle , which can minimize dust particles . Moreover , the blowing time can be adjusted freely from 0 to 99s , and the factory setting time is usually 15 seconds .
4. Anti - static air shower room can be equipped with infrared automatic induction , intelligent control panel , human voice prompt function . In addition , an emergency stop device is also provided . When the air shower fails , the power supply can be quickly cut off , so that all the doors of the anti-static air shower are opened . The safety of the user is largely ensured .
5. The anti - static air shower can fundamentally eliminate the root cause of static electricity , ensure the product quality of the electronics industry , and improve production efficiency .
Specification:
Anti-static Air Shower | |||||
Model | HA- AP1 | HA – AP2 | HA– AP3 | ||
External Size (W*D*H)mm | 1200X1000X2180 | 1200X2000X2180 | 1200X3000X2180 | ||
Internal Size (W*D*H)mm | 800X930X1910 | 800X1930X1910 | 800X2390X1910 | ||
Persons per cycle | 1-2 persons | 2-4 persons | 3-6persons | ||
Air Shower Duration | Factory set at 15 seconds (0-99s adjustable) | ||||
Construction | Power coated steel | ||||
SUS Nozzle | 12pcs | 24pcs | 36pcs | ||
Fan Consumption | 750w*1 set | 750w*2 sets | 750w*3 sets | ||
Fan Speed | 25m/s | ||||
Fluorescent Lamp | 20w*1 | 20w*2 | 20w*3 | ||
Noise Level | <62dB | ||||
Hepa filter | Size | 630X630X69mm | |||
Efficiency | 99.99% @0.3um | ||||
Resistance | <220pa | ||||
Pre-filter | Size | 785X385X21mm | |||
Efficiency | 75% @5um | ||||
Resistance | <30pa | ||||
Electrical | Power | 380V / 50HZ |
Anti-static ion bar Features
* It is a rod type, horizontal type static eliminator.
* Made of the latest patented anti-static technology, excellent electrical performance indicators.
* With two sets of independent positive and negative high voltage electrodes, long service life.
*Special strip slots on the bottom of the rod, which can be fixed by bolts.
*Works under high voltage and micro current conditions, and has good safety performance.
* Eliminate static electricity and have good ion balance.
air shower clean room
Features:
1.For clean room
Product and Factory
What hospital total solution we supply for ?
I. For Medical Gas Pipeline System:
(i) Medical Gas Source Equipment
(ii) Medical Gas Pipeline Controlling Equipment
(iii) Medical Gas Terminal Equipment
II. For Medical Clean Room System:
(i) Modular Operating Theatre products and Turn-Key project
(ii) Hospital Laminar Flow Air Purification System
III. Some Other Products for Hospital Engineering
LED Surgical Light
LED X-Ray Viewer
Vinyl Flooring
Vinyl Handrail
Vinyl Wall Bumper Guard
Vinyl Wall Corner Guard
Ceiling Mounted Ward Cubic Curtain System
Ceiling Mounted Infusion Pole System
Why Choose Our Products?
I. Original Manufacturer: Most products are manufactured by our own producing base. This makes us keep the offer price competitive, and control producing strictly;
II. Design & Customization Capability: With the experience technology team, we give design and customization service for customers hospital Medical Gas Pipeline System and Medical Clean Rooms System;
III. Total Solution: We supply whole series of medical equipment for Medical Gas Pipeline System and Medical Clean Rooms System, to help customers to reduce time and total cost; Also, to avoid the compatible mistakes from different suppliers;
IV. Professional Hospital Solution: We focus on hospital solution for Medical Gas Pipeline System and Medical Clean Rooms System since 2004; This help us to follow the latest technology and to know users demanding well;
V. Quality Management: The factory has founded strict quality management system, and has got ISO9001:2008, ISO13485:2003 certificates;
VI. Exporting Service: Professional exporting team, with several years experience, our products have been exported to more than 40 countries. We know different country customers' special requests for products, package, document, payments, certificates etc. and we work with together with our partners well.