Installation of cleanrooms is a highly beneficial step for a manufacturing plant or a research facility that expects the supreme level of cleanliness and contamination-free, controlled environment. However, without cleanroom air showers, you cannot expect the best efficiency out of your cleanroom setup. This article explains the characteristics of a good cleanroom air shower that assures perfect cleanliness.

Basically, there are various types of particles around us and a considerable amount of these particles are harmful to some manufacturing processes. Some everyday microorganisms too can be harmful to sensitive manufacturing processes. Since most of the industries consider manufacturing micro devices these days, contamination can become a serious threat to such processes. If you are involved in a manufacturing process that demands cleanrooms, you should go for it without compromising.

Air filters can be divided into primary filter, medium efficiency filter, high efficiency filter and sub-efficient filter model according to their working principle.

In the purification engineering industry, the air shower is one of the most important purification equipment, and it is the necessary passage to enter the clean room, which can reduce the pollution problems caused by entering and leaving the clean room.
The air shower is a highly versatile partial purification device installed between the clean room and the contaminated area.
When people and goods enter the clean area, they need to be blown through the air shower.
The clean air blown out c

Clean room, also known as Dust-free workshop or Dust-free plant. In the FED-STD-2, a cleanroom is defined as a room with air filtration, distribution, optimization, construction materials and equipment.
With specific operating procedures, cleanroom is used to control the concentration of airborne particulates to achieve proper cleanliness level.
Clean room means to minimize particles, harmful air, bacteria and other pollutants in the air within a certain space, and control air pollution.

The food processing purification workshop mainly adopts steel mixed or brick structure, and according to the needs of different products, it is suitable for the specific requirements of specific food processing in structural design.
The purification company pointed out that the environmental space should be compatible with production. Under normal circumstances, the per capita possession area of the processing personnel in the production purification workshop (except equipment) should not be l

With the development of the economy, the standards for purification in various industries are getting higher and higher. The purification standard of the factory workshop during the construction process will directly affect the quality of the products in the future, which determines the qualification rate of the products; the degree of purification of the operating room is related to the postoperative infection rate of the patient. The high-quality purifying operating room can improve the succes

Nowadays, Air filter devices come in variety of sizes and have different filtering effects, which can meet different operating conditions and environments . For example, the high temperature resistant HEPA filter that we are going to introduce today, it is obvious that its filtering effect is good, and it can be used in high temperature environment. What are the characteristics, applicable places and maintenance methods of this high temperature resistant air filter?

It is well known that surgery is directly related to the patient's life safety, and the development of surgery depends largely on the development of surgical infection control technology. In the developed countries such as Europe and the United States, the operating room uses an all-air system. In the early 1960s, the ASHRAE guidelines were adopted to adopt a new wind system. Each surgical unit has 8-12 times of ventilation. Room temperature 25.6 degrees, relative humidity 55%. The indoor exhaus

How to control operating room temperature humidity and pressure,The temperature and humidity of the operating room must be controlled within a certain range. Therefore, the operating room temperature in the design is set at t=22-25°C; the relative humidity is 35-60%, and the corresponding air conditioner and humidifier are configured according to different sizes of rooms.

At present, the air shower room on the market is blowing by the left and right sides of the air shower nozzle, but this kind of blowing method is particularly prone to cause turbulence or eddy current,

which does not achieve a good dust removal effect, but it is also very easy to bring the dust blown up into the clean room, and can not achieve a good cleaning effect.
Vertical air shower is composed of fan, high efficiency filter equipment, nozzle and return air system.
The high-speed air

Class 1000 clean room has a high level of cleanliness, second only to Class 100 clean room .It is often used in the pharmaceutical Industry, electronics, semiconductors, laboratories and biological products and other industries.